HMS SCOTT ring laser gyro navigator integration

HMS SCOTT is a United Kingdom ocean survey vessel that hosts a state-of-the-art deep ocean mapping system which was designed, developed, and is currently maintained and periodically updated by the Space and Naval Warfare Systems Center, San Diego, (SSC San Diego). A recent update of this system consisted of the replacement of an obsolete and very costly to maintain inertial navigation system. Another reason for updating the ship's inertial system was to provide higher accuracy attitude data, than was previously available with the old inertial system, to the high resolution multi-beam sonar system in order to produce improved bathymetric charts. After conducting a market survey of suitable inertial navigator systems, the Kearfott SEANAV ring laser gyro navigator (RLGN) system, using a monolithic T-24 gyro, was selected to replace the old inertial system. The selection of the SEANAV RLGN was based on its relatively low cost, high reliability, and, particularly, the roll and pitch data accuracies of typically less than 1-arc-minute. This attitude data accuracy was key to enable a significant improvement in the bathymetry data accuracy. Two SEANAV systems were integrated with GPS receivers, a system master time code generator, and electro magnetic (EM) log and Doppler sonar speed sensors to provide the navigation portion of the mapping data. Operational testing of this updated system aboard HMS SCOTT, in November, 2003, showed a marked improvement in the quality of the map product due, in part, to the improved attitude data provided by the SEANAV RLGN system.     

Reduced-order multiple model adaptive controller for flexiblespacestructure

The robustness of a moving-bank multiple model adaptive estimator/controller to order reduction in the controller design model is examined. It is shown that the adaptive mechanism and bank-moving logic are not confounded by the effects of unmodeled higher order modes of a large flexible spacestructure. Control characteristics are achieved that are essentially equivalent to those of an artificially informed benchmark controller     

Carbon dioxide and oxygen budgets of a plant cultural system in a CELSS--a case of cultivation of lettuce and turnips.

In order to collect basic data about CO2 and O2 budgets of a plant cultural system in a CELSS, the variation of the CO2 absorption rates of lettuce and turnips were observed during the growing period, under different conditions. The O2 release rates were deduced from the CO2 absorption rates multiplied by 32/44. As a result, when the light intensity, the photoperiod and the atmospheric CO2 concentration increased, the rates also increased. The effects on the turnips were more significant than those on the lettuce. Turnips at 310 micromoles/m2/s of PPFD, 24 hours of photoperiod and 1100 ppm of CO2 concentration grew most actively in the present experimental conditions. One turnip absorbed 32.3 g CO2 and released 23.5 g O2 for 6 days between 24 days and 30 days after sowing.     

Isotopic Criteria for Identification of Organic Carbon on Earth and Meteorites

Contrary to the often stated view, an enrichment of organic material in the light isotope is not a conclusive evidence of its life-related origin. The β¹³C - σ¹³C correlation is a special feature of biological systems. Therefore it can be used as a criterion for identification of organic carbon. A survey of the available isotopic data for organic compounds in meteorites shows that they do not comply with the β¹³C - σ¹³C correlation. The prevalence of amino and hydroxy acids in purines and sugars found in carbonaceous meteorites indicates that condensation of HCN and HCHO passed through cyanohydrin reaction, while biological evolution proceeds through formation of adenosine triphosphate (ATP). This, in addition to the isotope criterion, indicates that the organic compounds in carbonaceous chondrites are not life-related substances. This revised version was published online in August 2006 with corrections to the Cover Date.     

First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

Limits in tracking with extended Kalman filters

The classical linearized conversion of measurements from polar or spherical coordinates to Cartesian ones generates a bias restricting the use of this conversion to cases where the bias can be neglected. In this work, the validity limits for the classical 2D transformation from polar to Cartesian coordinates, as derived in previous work, are shown to be too restrictive and the limits for the 3D transformation from spherical to Cartesian coordinates are introduced. Furthermore, quantitative measures for the performance degradation of the commonly used extended Kalman filter (EKF) in comparison with the best linear unbiased estimation (BLUE) filter are obtained by simulating typical tracking scenarios.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

How Operational Oceanography Can Benefit from Dynamic Topography Estimates as Derived from Altimetry and Improved Geoid

With a precise geoid, GOCE will allow an estimation of absolute dynamic topography from altimetry. The projected benefits to operational oceanography and its applications are analyzed herein. After a brief overview of operational oceanography, we explain how the new geoids will be used in the future to improve real time altimeter products and to better constrain modelling and data assimilation systems. A significant impact is expected both for mesoscale (e.g. better estimations and forecasts of currents for pollution monitoring, marine safety, offshore industry) and climate (better initialization of coupled ocean/atmosphere models) applications. This revised version was published online in August 2006 with corrections to the Cover Date.     

Satellite mobile communications spread-spectrum receiver

Since 1999, ESA has conducted a number of system studies and technological developments to support the European and Canadian industry in the definition of a Satellite UMTS (S-UMTS) component development strategy, identifying critical technological areas and promoting S-UMTS demonstrations. In particular, the MUSIC project has successfully demonstrated advanced digital signal processing techniques to mitigate CDMA interference in spread-spectrum receivers, thus increasing the capacity and/or quality of service of a wireless communication network. The low-complexity solution for interference mitigation investigated and developed in the project is particularly suited for being implemented in mobile terminals.